Dang, I need to try that. Good idea.

It might just be the specific spool/brand of PETG you used. Try buying some from a major well-known manufacturer, like Overture, Polymaker, etc. I’ve had cheaper brands shrink, warp, have adhesion issues, and all sorts of other quirks.

Make sure it’s from one of Sunlu’s official stores… aliexpressis pretty shady lol.

Nope, this is the same size as the stock Prusa sheets. The sheets are all a little bigger than the actual build area.

This is just a regular-sized Prusa MK4, 250 x 210mm xy build area. I made this custom magnetic G10 sheet for printing PETG, it’s 253.8 x 241mm.

You could also mess with your retraction settings to try and reduce stringing.

I had one weird roll of PETG that could only be printed at lower temperatures, so it’s possible. Still looks like the filament is wet to me… I recommend picking up a Sunlu S1 Plus when it drops under $40, I like being able to both dry the spool and print straight from the dryer (only takes a couple hours to re-absorb moisture).

Ended up moving the little 500VA UPS from my computer to the 3D printer. Hopefully it’ll help for brief blips.

This model was set up for it already in the .3mf file. It stops, moves the toolhead over, automatically unloads the filament, and waits for me to yank it the rest of the way out then stick in another color. It then purges the nozzle a bit to get the main color fully flowing and asks you if it’s correct before proceeding. I did this like 7 times for this stupid half-failed box lol.

Edit: Also, you can left-click the plus sign on the layer slider at any height you want after slicing in PrusaSlicer to add manual color changes in.

This could be it, OP should check what the actual temperature says on the screen during printing.

Aside from drying, here are some thoughts:

Double-check the print temperature, PETG should be about 240-ish. Also the spiral vase mode may be the issue if your model isn’t designed for it. Also check your z offset, the first layer should be almost a flawless sheet… if not, stop the print and try again while live adjusting the z until it’s correct. Typically PETG doesn’t like to be squished down as much as PLA.

I printed the panels using the full width of my large 300x300mm print bed. I have three of them mounted to the wall. There are several sizes available though, you can always merge more smaller ones.

It’s actually just a shorter version of the tall basket model that was available. I originally meant for it to hold my alcohol bottle, but it was too small… then I discovered it fits the canned air perfectly.

Don’t question my methods lol

Neat, good job. You might want to include what screw size it fits, and the word “anchor” somewhere in the description/title for searching (these are typically called drywall anchors in the US).

Here’s a close-up of the vase:

https://i.imgur.com/YGmJ3OP.jpg

This right here. Crazy to me that people would pay for what ublock origin does for free. Especially people defending the need to shell out for the service to “support” a trillion dollar company like Google.

It looks super stringy, did you dry the PETG first? I like the result though.

Mine just shipped today, after waiting three months exactly. Pretty excited.

Bed and extruder both seem too hot for PETG, but it depends on your exact brand/type of filament. Are you using a textured/satin sheet? Glue stick on a smooth sheet is pretty unreliable. Some brands of PETG seem more prone to contracting while cooling than others too (avoid “Kaaber” on Amazon, it was pretty bad hah).

Also make super sure your bed is clean. Washing with dawn liquid dish soap, drying carefully, then wiping with high-roof rubbing alcohol works best for a new sheet.