You select the active hob and set the desired timer. Usually the timer is either limited to a single hob at once, in more premium alternatives you might be able to set one for each hob individually.

I’ve only ever seen this in separate cooktops though, not in stoves.

There are different versions for interior and exterior use, using different types of glue. At least OSB/0 and OSB/1 can be used for internal applications and are considered safe. Not that I would trust a landlord doing this to select the correct board type, especially since the safe variants might have some issues with the humidity exposure in a kitchen.

But there still are many cases for using OSB indoors, e.g. behind drywall to give it some more strength (instead of more expensive plywood). Wouldn’t want to leave it exposed in a kitchen though, it’ll get messy if it’s not properly treated, and in the picture it doesn’t seem to be.

For local usage on linux there’s virt-manager, has been good enough for my use at least, and the integrated spice client has relatively good graphics performance for normal desktop use.

Edit: don’t know about a good gui for running qemu on windows, though

I find it funny how whoever originally created this meme somehow ended up using a picture of Macintosh II (or IIx, IIfx) to represent a computer. An over 30 yo mahcine, which while capable of speech synthesis is not going to talk to you without being requested, unless you’ve configured something very incorrectly.

Feels a bit like a floppy disk still being the save icon; computers are still being presented with floppy drives and a CRT monitor in clip-art and such.

Yep, should’ve probably clarified that I’m personally not talking about the US. Housing costs are included in HICP (the index in Europe) but not the cost of purchase AFAIK, only the cost of ownership, calculated via more direct means like rent or energy costs.

Should’ve probably included where I’m from, that being Europe, more specifically Finland. As far as I know our index for inflation (HICP) sourced from ECB hasn’t so far taken into account OOHC (owner-occupied housing cost) and has focused more on rents and other costs of living. Proposed roadmaps for changing the official indices would back this understanding, unless I’m interpreting something very incorrectly.

There’s some rent controls in place in most European countries, so rents aren’t tightly coupled with house prices in many locations. As such, for specific dwellings it can often be cheaper to rent than to own, since rent increases are regulated at least a bit, but cost to purchase the unit altogether is not. In many more expensive cities there’s also the issue of units not being available to rent, since the rents don’t directly reflect the market value of the rented unit.

Though including OOHC to the calculations will cause some difficulties when you take into account more rural areas, where the value of housing can not only go down, but actually be negative. In rural Finland there are cases where you can actually be paid to get a whole apartment complex out of someone’s hands, since the costs outweigh whatever rent you can get out of the place. People are opening shell companies and selling stock in an apartment complex (a peculiarity of the local system called limited liability housing companies, or asunto-osakeyhtiö) to them at a loss, to get rid of paying for upkeep.

deleted by creator

SEO is of course a problem, but it’s been a problem for a long time, and there are ways around it for those who know how to seek information. Proper use of keywords, blacklisting sites with known spam information, searching specific sites, mandating specific words and phrases to be contained in the search etc. It’s true, however, that information has become less discoverable during the latest decade – at least reliable information has.

While AI-written spam articles and such have been a pain sometimes, gatekeeping content is in my opinion as big of a threat to the proper use of search engines for finding information. As more and more sites require you to log in to view the discussion (social media is the worst offender here) much of the search results is unusable. Nowadays the results lead to a paywall or a login wall almost more often than to a proper result, and that makes them almost completely useless. I understand this kind of thing for platforms which pay for creating the content, e.g. news sites, but user-generated content shouldn’t be locked behind a login requirement.

I fear the day StackOverflow and Reddit decide the users’ discussions should be visible for only logged-in users. Reddit has already taken the first steps with limiting “NSFW” content to logged-in users only (on new reddit). Medium articles going behind paywall also caused some headaches a while back.

Well, the example was with a tent which is a single layer of cotton between you and the environment, and by no means resembles anything even remotely insulated. That’s why it needs a relatively powerful heater to stay comfortably warm. In normal use you have quite a lot of control over the temperature of the heater, mainly with the size and amount of firewood -> effective surface area of the fire.

For static buildings the situation is different, with enough insulation you can get by with almost no heating. Zero-energy building is a thing in Finland as well, and although it has its challenges, it’s still possible to keep your home warm with only your body heat in e.g. -40. The main difficulty you’ll encounter there is getting rid of the moisture in air, since being that energy-efficient will require having your home almost fully enclosed. You’ll also need to be careful to properly limit the moisture getting out from the house, as the dew point will be inside the insulation and any moisture getting out will condense inside, eventually leading to mold.

I haven’t actually reached the end game in Frostpunk 1, but at a glance it would require some efficiency improvements and better insulation – and given enough insulation and heating anything is possible. If your people are sleeping under the sky hugging the generator, I’d assume you won’t get past the end game. A real-world example that somewhat resembles the Frostpunk world would be people living in Yakutsk, Russia, where they have more of a brute-force approach to the -60 °C temperatures – just burn enough gas to keep your log cabin warm. Surviving outside at those temperatures without protective equipment would be difficult though, especially since most materials won’t stay flexible at -120 °C or -140 °C. You’d find it pretty difficult to move around.

Edit: But also, a mandatory “don’t quote me on this”, as building is my hobby, not my job. I’ve some knowledge, and some experience, but by no means am I a professional.

It’s safe enough, in the Finnish army we occasionally get the tent heater red hot, and as long as nothing flammable touches it or is too close, it’s fine. It will radiate heat quite well when that hot, but won’t be anywhere close to dangerous if you know what you’re doing. In the tent we of course have some water nearby to extinguish the possible flames but still.

You basically need to have it glowing red if you’re to keep the tent warm in -15 °C or lower. - 30°C needs something closely resembling the picture posted.

Here’s an example, unfortunately hosted on Reddit https://www.reddit.com/media?url=https%3A%2F%2Fpreview.redd.it%2Fjiquty6qz7s51.jpg%3Fwidth%3D1080%26crop%3Dsmart%26auto%3Dwebp%26s%3De4b8083400858eccc1786d7b32b94b759b2bc6c2

In Finland at least, and AFAIK most other European countries as well the law mandates drivers stop if they see a pedestrian about to cross the road. We have “intention to cross the road” buttons too, in some intersections with limited visibility or a lot of traffic – but by no means are you required to use them. From the looks of it crosswalks have the right of way in the US as well.

I can’t really understand the assumption that people don’t need to pay attention to the road because of some button. In a sensible legislation the driver is responsible for the accident even when the pedestrian is jaywalking unless they literally jump in front of the car from behind a bush or something. If the police rules you had a realistic chance to avoid the collision you, as the driver with a license meaning you’ve had the necessary tutoring, should be at fault.

A Nokia 5310, before moving over to a ZTE blade gen1. Really liked the XpressMusic phones, and their proper headphone out and proper signal levels when using it. Trying to use the aux on car stereos with any following smartphones before my current Xperia 5 III was hopeless, since the maximum voltage levels were so low you had to turn the amplifier volume up to 11 just to hear anything…

I wouldn’t call OLED a minor upgrade – considerably better battery life and color rendering. Also better blacks without background bleed, which is a major annoyance when gaming in dark (bus, plane, bedroom etc.)

800p is for a good reason – although e.g. 1080p would be more crisp, personally I’d pick better colors and higher refresh rate over resolution in this case. When gaming with the APU, most games (especially AAA) can’t be upped to 1080p either way without considerable performance drop. I kinda understand the need for higher resolutions from a strategy gaming standpoint, but to me at least the compromise isn’t worth it.

When PPI is considered with standard viewing distance, it’s still better than my 1080p 13" laptop. With proper anti-aliasing there’s no need to push it further, at least IMO it’s not worth it compared to the reduced performance.

2560x1600 would make a bit more sense, as you could drop the resolution to 1280x800 without having to smear pixels due to pixels not lining up in the smaller resolution. That would also be better for strategy games. Don’t really know how good the panel availability for those is, though, since it’s probably using a tablet screen.

GitLab is Ruby at least, I don’t immediately remember any others but there probably are some

If you’re using powdered detergent, make sure yours doesn’t have zeolite as the water softening agent. It will deposit in the machine, and starts eventually covering the fabrics with a talcum-like powdery substance. It gets especially bad if you either have to use a lot of detergent because of hard water, or are overusing the detergent.

Zeolite was brought in to replace phosphates due to environmental concerns, but it has its own problems with the washing results.

One other thing that often ruins the freshness of clothes for me is overly scented/perfumed detergent. The smell can get quite overwhelming, and contribute to a chemical-y smell and feel.

Just in case someone misreads this, add the vinegar as the softener, so it’s not in the first load that contains the detergent. The detergent is a base, and relies upon that fact to get rid of some of the stains, and vinegar as an acid will neutralize that. Vinegar is meant to be in the rinse cycle when washing laundry, where it can help get rid of any extra detergent by neutralizing it and do any other magic it does.

Also, though I don’t usually encounter them often, do note that vinegar can wash away zinc and silver oxides used for some sterile clothing, and can supposedly damage lyocell.

But overall I second these suggestions. Most times the amounts listed for detergent are far too big, and you can often get by with less.

Not an expert on this, but I’d assume one thing is that in 3-2-3 two people need to stand up and give way if the person in the window seat wants to stretch their legs or go to the toilet. 2-4-2 only one person has to get out of the way in all situations. Would guess that’s actually somewhat important in widebodies since those are used on longer routes, and having to stand up twice as often in the aisle seat would be something of an inconvenience.

There’s probably more, I’d guess that would also affect boarding times and so on, but this is the first thing that comes to mind.

A mercury arc rectifier. The mercury vapor is ionized, and used for increasing the current carrying capacity of the component – compared to how much a traditional valve design with complete vacuum would work.

In short, it makes DC out of AC.

And we’ve nowadays taken it even further, in spoken Finnish we’ve even got rid of the “hän” and mostly use “se”, which is the Finnish word for “it”. The same pronoun is used for people in all forms, animals, items, institutions and so on, and in practice the only case for “hän” is people trying to remind others they consider their pets human.

Context will tell which one it is.

Well, in this case it might even be a technological limitation, which can be solved with a workaround but leads to a poor user experience.

Firefox, for security reasons, doesn’t allow opening local files for writing. That means, it’s not possible to make a web application that can autosave to your machine after you open a file, meaning you have to download a new version of the file every time you save. You can get around this issue by importing the files in question to the browser’s local storage, or by using cloud storage via an API, but local saving is a feature that people have come to expect and missing it will lead to complaints from the users.

The missing API is called File System Access API and has been available on Chrome for years. I’ve personally had to write my web apps around this limitation multiple times, since I want to support Firefox. By no means is this a valid reason to exclude Firefox in my opinion, but I can also easily see why a company would want to not bother with user feedback on ctrl+s not working in their web application.