Why? They’re not placing the bug bounty on their own code… But KVM the in kernel virtualization platform built into Linux.

This soldier won’t see real repercussions for this. At worst he will he courmarshalled and get a dishonorable discharge and nothing else.

Uh… A court martial is typically equivalent to a felony. If you’re found guilty it’s often associated with prison time and civilian felony statuses.

Step 1: Flee the country

Good luck doing that. It’s a bitch to live just about anywhere else you’d actually want to live without citizenship.

Eh, in Trump’s case it was best to be running in autopilot… His tweets were him “thinking”

Nothing about their comment outlined that they didn’t know how to use it. But that they never did use it.

Nothing about their comment eludes to any fact that they’re embarrassed at all. They posted it publicly and directly with not reservation which is the opposite of “embarrassed”.

They didn’t blame anyone for anything related to the iron itself. But for shallow intentions if they care at all about the clothes that they wear. Which I can understand and agree with to some extent.

You on the other hand… You’re a jackass. Lots of insinuations, lots of assumptions. Just to put down some random person on the internet for not wanting a fucking iron that probably was the 20$ special at wally world.

Nope. There is an industry standard way of measuring latency, and it’s measured at the halfway point of drawing the image.

No. And if you want to actually provide a link to your “industry standard” feel free to, just make sure that your “standard” actually can be applied to a CRT first.

You can literally focus the CRT to only show one pixel (more accurately beam width) worth of value. And that pixel would be updated many thousands of times a second (literally constant… since it’s analog).

If you’re going to define latency as “drawing the image” (by any part of the metric) then a CRT can draw a single “pixel” worth of value 1000s of times a second… probably more. Where your standard 60hz panel can only do 1/60th a second… (or even the highest LCDs at 1/365).

If there is a frame to draw and that frame is being processed, then yes. You’re right. Measuring at the middle will yield a delay. But this isn’t how all games/operations work for devices in all of history. There are many applications where data being sent to the display is literally read from memory nanoseconds prior. CRTs have NO processing delay that LCDs do have.

Further points of failure in your post. CRTs are not all “NTSC” standard (Virtually every computer monitor for instance). There’s plenty of CRTs that can push much higher than the NTSC standard specifies.

Here’s an example from a bog standard monitor I had a long time ago… https://www.manualslib.com/products/Sony-Trinitron-Cpd-E430-364427.html

800 x 600/155 Hz
1024 x 768/121 Hz
1280 x 1024/91 Hz
1600 x 1200/78 Hz

So on a 60hz LCD will always be 0.016 to do the whole image. Regardless of it’s resolution being displayed. Not so on the CRT… Higher performance CRTs can draw more “pixels” per second. and when you lower the amount of lines you want it to display the full frame draw times go down substantially. There’s a lot of ways to define these things, that your simplistic view doesn’t account for. The reality is though, it’s possible if you skip the idea of a “frame” that the time from input to the time of display on the CRT monitor is lower simply because there’s no processing occurring here, your limit is physics of the materials you build the monitor out of. Not some chips capability to decode a frame. thus… No latency.

Not frametime. Not FPS. Not Hz. Latency is NONE of those things, otherwise we wouldn’t have those other terms and would have strictly used “latency” instead.

And a wonderful example of this is the commodor64 tape loading screens. https://youtube.com/watch?v=Swd2qFZz98U

Those lines/colors are drawn straight from memory without the concept of a frame. There is no latency here. Many scene demos abused this function to achieve really wild affects as well. Your LCD cannot do that, those demos don’t function correctly on LCDs…

Lightguns are a perfect example of how this can be leveraged (which is completely impossible on an LCD as well).

Specifically scroll down to the Sega section. https://www.retrorgb.com/yes-you-can-use-lightguns-on-lcds-sometimes.html

By timing the click of the lightgun input to which pixel is currently being drawn by the frame to take that as input for the gun. That requires minimal latency to do. LCDs cant do that.

Ultimately people like you are trying to redefine what latency is that flies in the face of actual history that shows us there is a distinct difference that has historically mattered and even applications of that latency that CANNOT be what you’re claiming it to be.

https://yt.saik0.com/watch?v=llGzvCaw62Y#player-container

can you tell me why the LCD on the right is ALWAYS behind? And why it will ALWAYS be the case that it will not work, regardless of how fast the LCD panel is? The reason you’re going to come to is that it’s processing delay. Which didn’t exist on CRTs. That’s “LATENCY”.

When talking about retro consoles, we’re limited by the hardware feeding the display, and the frame can’t start drawing until the console has transmitted everything.

This is where you’re completely wrong. CRTs don’t know the concept of a frame. It draws the input that it gets. Period. There’s no buffer… there’s no where to hold onto anything that is being transmitted. It’s literally just spewing electrons at the phosphors.

Edit: typo

Edit2: to expound on the LCD vs CRT thing with light guns. CRTs drawn the “frame” as it’s received… so as it gets the voltage it varies that voltage on the electron gun itself, which means that when the Sega console in this case sets the video buffer to the white value for a coordinate and displays it, it knows exactly which pixel is currently being modified. The LCD will take the input, store it in a buffer until it gets the full frame. Then display. The Sega doesn’t know when that frame will actually be displayed as there’s other shit between it and the display mechanism doing stuff. There is an innate delay that MUST occur on the LCD that simply doesn’t on the CRT. That’s the latency.

CRTs do have latency

Only if you’re measuring “how long to draw a full image”. (which is not latency).

The time it takes for voltage input to equal drawn pixel on the phosphor is much less than the ms scale, which LCD panels simply cannot do.

Latency. Not refresh rate or FPS.

or prevent us from watching with a VPN enabled.

Man this one chaff’s me the most. I way a paying Netflix customer like 8 years ago. I had IPv6 setup as a 6rd tunnel through HE (Hurricane Electric) because my ISP didn’t offer IPv6. Netflix treated that as a VPN and blocked me as a paying customer… Even though I lived/payed from the same fucking locale. It’s not like I was using a VPN to bypass a Geoblock. I was just making IPv6 available to myself. I cancelled because of that. You do not get to tell me how I access the internet at large, especially when I’m not even being shady about it.

Yeah… when you pull up stats for Netflix library, you learn some things… Like how little content they actually had. Never cracked 7000 movies… And while that may seem like a lot to a lot of people out there. Those of us that remember blockbuster stores, you ignore like 90% of them cause they’re dumb or silly movies that you’d never watch anyway (or stuff you’ve already watched). Then you can put actual numbers to it… If each of these are full bluray rips (which they’re not as far as Netflix goes) they only take up 175TB… It’s not a lot of movies at all.

https://www.businessinsider.com/how-netflix-movie-and-tv-show-catalog-changed-over-time-2020-2

It’s pretty easy to see how an individual could collect more content than netflix easily. Now add money to the equation… I think it would be possible to collect double or triple netflix easily.

The real fun is going to be when he’s finally up and running… I have ~250TB of data on the Truenas box. Initial sync is going to take a hot week… or 2…

Edit: 23 days at his max download speed :(

Fine… a hot month and a half.

Ceph has been FANTASTIC for me. I’ve done the dumbest shit to try and break it and have had great success recovering every time.

The key in my experience is OODLES of bandwidth. It LOVES fat pipes. In my case 2x 40Gbps link on all 5 servers.

Nah, that’d be mean. It isn’t “simple” by any stretch. It’s an aggregation of a lot of hours put into it. What’s fun is that when it gets that big you start putting tools together to do a lot of the work/diagnosing for you. A good chunk of those tools have made it into production for my companies too.

LibreNMS to tell me what died when… Wazuh to monitor most of the security aspects of it all. I have a gitea instance with my own repos for scripts when it comes maintenance time. Centralized stuff and a cron stub on the containers/vms can mean you update all your stuff in one go

40 ssds as my osds… 5 hosts… all nodes are all functions (monitor/manager/metadataservers), if I added more servers I would not add any more of those… (which I do have 3 more servers for “parts”/spares… but could turn them on too if I really wanted to.

2x 40gbps networking for each server.

Since upstream internet is only 8gbps I let some vms use that bandwidth too… but that doesn’t eat into enough to starve Ceph at all. There’s 2x1gbps for all the normal internet facing services (which also acts as an innate rate limiter for those services).

I could… But it would be a royal pain in the ass to find a VPS that has a clean address to use (especially for email operations).

Exactly this. 2 phase into house, batteries on each leg. While it would be exceedingly rare for just one phase to go out… i can in theory weather that storm indefinitely.

Nope 240. I have 2x 120v legs.

I actually had verizon home internet (5g lte) to do that… but i need static addresses for some services. I’m still working that out a bit…

Fire extinguisher is in the garage… literal feet from the server. But that specific problem is actually being addressed soon. My dad is setting up his cluster and I fronted him about 1/2 the capacity I have. I intend to sync longterm/slow storage to his box (the truenas box is the proxmox backup server target, so also collects the backups and puts a copy offsite).

Slow process… Working on it :) Still have to maintain my normal job after all.

Edit: another possible mitigation I’ve seriously thought about for “fire” are things like these…

https://hsewatch.com/automatic-fire-extinguisher/

Or those types of modules that some 3d printer people use to automatically handle fires…

From what I’ve read (I’ve done a few hours of reading on this specific topic at this point[damn you curiosity]). No. They’ve done all of 2 things with Israel in basically a decade. 2 exercises in a decade isn’t really enough to say that there’s any meaningful relationship other than “we’re not enemies”.

I could be wrong… But I do not get that intent at all from Cyprus, which aligns with their “surprise” at being yelled at from some other country about a country they barely interact with from a military perspective.

I’m ex-military and have personally participated in more exercises with countries the USA was less friendly with politically.

Absurdly safe.

Proxmox cluster, HA active. Ceph for live data. Truenas for long term/slow data.

About 600 pounds of batteries at the bottom of the rack to weather short power outages (up to 5 hours). 2 dedicated breakers on different phases of power.

Dual/stacked switches with lacp’d connections that must be on both switches (one switch dies? Who cares). Dual firewalls with Carp ACTIVE/ACTIVE connection…

Basically everything is as redundant as it can be aside from one power source into the house… and one internet connection into the house. My “single point of failures” are all outside of my hands… and are all mitigated/risk assessed down.

I do not use cloud anything… to put even 1/10th of my shit onto the cloud it’s thousands a month.

They’re caught off guard because all they’ve done up to this point was humanitarian aid. And there’s been no hints for participating any further. Imagine yelling at someone who’s only ever done positive things for your people.

It’s not complicated. It’s moronic on their end.