• 1 Post
  • 850 Comments
Joined 2 years ago
cake
Cake day: July 7th, 2023

help-circle
  • no need to actually create mass unrest. Just declare that there’s mass unrest, who cares if it’s real?

    I joked with my buddy earlier today about something similar. Tensions are so high that someone could realistically kick off a revolution simply by convincing people that the revolution had already started. Get a few fake (but convincing) articles about revolutionaries across the country. Spread them far and wide, and shout them as loud as you can… If you got enough reach to hit critical mass, there’s a sizable part of the population that would likely go “well fuck it, I guess we’re doing this” and hit the streets with a real revolution.

    Things have gotten to the point where if I woke up tomorrow morning to news of a revolution, I wouldn’t really be shocked. And that says a lot about the current state of affairs…


  • I’ve said for a while that AMD will eventually eclipse all of the competition, simply because their design methodology is so different compared to the others. Intel has historically relied on simply cramming more into the same space. But they’re reaching theoretical limits on how small their designs can be; They’re being limited by things like atom size and the speed of light across the distance of the chip. But AMD has historically used the same dies for as long as possible, and relied on improving their efficiency to get gains instead. They were historically a generation (or even two) behind Intel in terms of pure hardware power, but still managed to compete because they used the chips more efficiently. As AMD also begins to approach those theoretical limits, I think they’ll do a much better job of actually eking out more computing power.

    And the same goes for GPUs. With Nvidia recently resorting to the “just make it bigger and give it more power” design philosophy, it likely means they’re also reaching theoretical limitations.


  • Netflix streaming isn’t limited.

    Yes it is. It’s a monthly subscription. You pay every month. That’s a time limitation. If you pay for a month, you only get a month of usage, just like a Usenet monthly subscription.

    Costco isn’t limited to 5 visitors a month.

    But again, you only get the month you paid for. It’s a time limitation, just like a monthly usenet subscription.

    Many ISPs don’t limit you to a preset amount of data (fuck you Crapcast).

    Neither do monthly usenet subscriptions. I think you need to go re-read my original comment, because you seem to think that the monthly subs are limited. They’re not. The only limitation on monthly subs is time. Which is the exact same limitation as the other subscriptions you mentioned.


  • Wait, so I have to pay for access and even then it’s still limited?

    I mean, all subscriptions are limited in some way. That’s how a subscription works. You either get limited by time (monthly sub) or by usage (data cap). If it were a perpetual/lifetime access license, it wouldn’t be a subscription.

    That’s why I said most people keep a monthly subscription for everyday usage, and then only use the secondary subscription when their primary is missing something. The usage doesn’t expire, so it’s not something you need to constantly maintain unless you’re actively using it. So they’re not constantly getting dinged for usage on that second provider, because the monthly doesn’t have a data cap.

    The reason people like Usenet is because you don’t need to worry about seeders or dead torrents. You grab the file you want, and it caps out your gigabit download speed every time.


  • Gotcha. It’s possible your modem was trying to act as a router as well, which would cause a Double-NAT situation. Most ISPs will ship a modem/router combo, but the router part is always fucking dog water. And the issue with double-router setups is that if you try port forwarding on your router, the ISP’s router won’t automatically detect the open port, so you’ll still be blocked.

    If you do end up looking into it again, see if the modem allows you to set up bridge mode or DMZ mode, and point it to your router. (You’ll need to undo any old port forwarding stuff you attempted last time first, or else it won’t work!) Basically, this takes all of the modem traffic and passes it directly to your router, instead of trying to do routing on the modem/router. Which is honestly what you want, because your personal router is almost certainly going to be better than the shitty one they ship. This will eliminate the Double-NAT situation, because the ISP’s router is going to be completely disabled and is passing all of the traffic directly to your router.

    It’s also possible that CenturyLink runs CG-NAT, which would cause a Double-NAT situation on the ISP’s side. More and more ISPs are running CG-NAT to avoid transitioning to IPv6 as long as possible. Basically, there aren’t enough IPv4 addresses available anymore, so ISPs have started giving the same IPv4 address to multiple users using CG-NAT. Your public IP will be shared with multiple users via CG-NAT, the same way your router is sharing the internet connection with multiple devices via NAT. You can check your public IP address in your modem (or your router, if you set up DMZ earlier.) If you’re within the 100.64.x.x to 100.127.x.x range, CenturyLink probably has you on CG-NAT (since those are the public addresses reserved for CG-NAT.) But this breaks port forwarding, because you would also need to forward the port at the carrier level, (which you have no way of doing.)

    If they do have you behind CG-NAT, your only real option is going to be a reverse proxy. Basically, Plex/Jellyfin would ping a remote server, which then proxies the request down to your server. It wouldn’t require any port forwarding on the server’s side, because the proxy will be using https directly. Nginx is a popular free reverse proxy service.




  • The best home-lab way to do it is to have a standalone computer to act as a media server, then a NAS to actually store the content. Just grab a pre-built computer with an intel chip that supports QuickSync. The HP EliteDesk is a popular choice, since they’re commonly used in corporate settings; There are always a ton of refurbished units available for super cheap, since corporations will upgrade their entire cubicle-maze and recycle their old computers.

    Some people will try to run things directly on their NAS, but basically every affordable NAS on the market will end up being underpowered for most users.

    As for actually connecting, what part were you having issues with?


  • The issue is that this only works when the torrent community is healthy. If everyone used Streamio, nobody would be able to actually use it. Because it doesn’t seed the content, it just leeches and deletes it automatically. So if everyone used Streamio, there would be no seeders, and your streams would never actually work.

    Streamio is the “fuck you I got mine” of the torrenting world.


  • It requires a subscription, which scares off most of the casual “just looking to try it” users. It’s as simple as getting a Usenet subscription. Usenet providers are sort of like ISPs. Each provider will have an umbrella of servers that they sync with, so it’s worth researching which provider you want to go with. Most will have a wide variety of content, but they all follow different policies regarding things like DMCA takedowns. Many people like to get two different subs so they can have a primary and a backup provider.

    Subs typically come in both monthly subs and usage subs. For instance, the monthly sub will be unlimited access for a month, while a usage sub will just be like 100GB of download bandwidth, and you don’t get charged again until you use that 100GB. If you’re doing a lot of downloading, you’ll probably want a monthly. So most people will have a monthly subscription for their primary, then a usage sub for their secondary. So they only actually use their secondary if something is missing from their primary, and they’re not constantly maintaining two monthly subscriptions.

    Actually using Usenet will require a Usenet reader, which is a program that actually interfaces with the Usenet network. Sort of like how a torrent program is used to download torrents. Most readers will integrate with services like the *arr suite to automatically search for and download content. If that’s something you’d be interested in, look into the suite and see which readers work best.






  • I call them Rubber Duck Managers.

    There’s an old story about a website designer finishing a site. But they knew the approval for the site would need to come from one specific manager. This particular manager was notorious for changing things just to be able to say they contributed. Nothing could ever pass over this manager’s desk without at least one revision, because the manager wanted to be able to say that they had a hand in the project. They weren’t ever content with just sitting back and going “yeah, looks good. Ship it as-is.”

    So the designer got the site looking exactly how they wanted it. It was perfect… And then right before they sent it off to be approved, they added a banner of spinning rubber duck gifs at the very top of the page:

    The manager sent back “yeah, just get rid of the damned ducks before the site goes live.” By giving the manager a big bright “this needs to be fixed” thing to change, the designer was able to get the site they actually wanted. So if you’re ever dealing with a manager like this, be sure to give them a figurative rubber duck to “fix”.


  • They’ve been pro Israel the whole time. They’ve never been about defending Jews; They just defend Israel, and call any opponents antisemitic. The issue is that as Israel slid into fascism, the ADL found themselves having to defend it. Which means that now they find themselves having to defend Israel’s fascist allies, who are doing blatantly fascist shit.





  • Just an FYI, it’s best practice to actually type out the words the first time, then initialize them afterwards. If you never type them out, many people will have no idea what you’re talking about.

    It just reads like every military dudebro’s deployment story.
    “Ah yeah we had to FTP the RBO to the HEP, but before we could do that the ASO had to POI the BBU. And of course, that means we had to help the ASO set up their LKI before they could start the POI. All while EMGs were bearing down on us with their TGT-30’s. But once we got the LKI set up and the ASO was able to POI, the BBU went pretty quickly. So we got the RBO FTP’ed to the HEP in record time, and were back at the FOB by EOD.