• 𝕸𝖔𝖘𝖘@infosec.pub
      link
      fedilink
      English
      arrow-up
      3
      arrow-down
      1
      ·
      9 months ago

      Hahaha!! I wish! Actually, I have old equipment that only takes the 6.35mm TS (and a couple TRS) connectors, and I don’t like adaptors, as they almost always noticeably reduce audio quality.

      • WaterWaiver@aussie.zone
        link
        fedilink
        English
        arrow-up
        3
        ·
        9 months ago

        I don’t like adaptors, as they almost always noticeably reduce audio quality.

        Huh? 3.5mm to 6.35mm adapters, the small bits of metal and plastic, or are you talking about something else?

        • 𝕸𝖔𝖘𝖘@infosec.pub
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          1
          ·
          9 months ago

          Yeah. Maybe I just bought the super cheap ones? Not sure. I ended up getting a 3.5 to 6.35 cable, and haven’t had a problem since.

          • WaterWaiver@aussie.zone
            link
            fedilink
            English
            arrow-up
            2
            ·
            9 months ago

            That’s really weird o.o The adapters should just be metal and plastic, same as the cables.

            Maybe they have a really weak connection internally, ie high resistance? This might lead to both lower volume in the headphones and (in some circumstances) higher noise, especially if it’s an unstable resistor.

            I recommend starting a shelf of cursed items :)

              • WaterWaiver@aussie.zone
                link
                fedilink
                English
                arrow-up
                1
                ·
                edit-2
                9 months ago

                This could end up competitive.

                Invite people to your house, give them a tour and briefly mention the shelf before scurrying them on. Watch their faces contort but don’t give them the opportunity to ask any questions.

                EDIT: I have a vague guess at what could have gone wrong with your adaptor. It might have had OK L and R contacts but a broken G contact. You would then hear the difference between the L and R channels, which most often sounds like garbage. Music would be weird (entire instruments/vocals disappear) and mono audio would be silent or near-silent (so you’ll have to turn it up a lot and will hear noise).